Corner Guards — Paintable PVC Wall Corner Protection for Aged Care

WallGuard Corner Guards protect exposed wall corners from the daily impacts that cause the most expensive damage in care facilities: hospital bed movement, trolley and cart impact, walker and wheelchair contact, and furniture removals.

Features

• 2mm impact-resistant, abrasion-resistant PVC — rated fireproof
• Adhesive-mounted — no drilling, no wall fixings, no specialist installation
• Paintable to match any wall colour — blends seamlessly into the environment
• Cut to any length on-site with a standard handsaw
• Wipe-clean with standard commercial cleaning products

Sizes and pricing

• 2400mm — $38.50 +GST per unit: Full-height coverage for corridors, doorframe corners, anywhere beds or trolleys make contact. Recommended for most applications.
• 1200mm — available on request: Lower-impact zones with mainly walker and wheelchair traffic.

Where to use Corner Guards

Bedroom entry corners, corridor intersections, pillars, serveries, staff corridors, and communal spaces. Any high-traffic area where people, equipment, and furniture move through a facility daily.

A standard 20-room ward typically has 40–60 exposed corners worth protecting. At $38.50 per 2400mm length, full coverage costs less than a single repair callout.

Installation

Apply No More Nails or equivalent adhesive in a zig-zag pattern to the back of the guard, press firmly against the corner, and hold until set. For a high-end finish, gap and paint the join where the guard meets the wall. One cartridge covers approximately 20 linear metres.